Modern PCB Designer Studio

Modern PCB Designer Studio - Standard

For hobbyists, home projects, startups and students.
Can be used for commercial use.
You must login to add it to cart.
SKU: ModernPCB_Standard
€49.00
€9.00

This is our low-priced version.

Download it from the downloads page.

Who is it for?

It is for hobbyists, students, startups, anyone who wants to design PCBs for any purpose, including commercial use.

When can be used?

You can use it for designing your school project, for your hobby, home projects or startups. You can create boards at home, or use a PCB board manufacturer, you can use it for commercial purposes. You can design your own boards and sell them; you can work as a freelancer, etc.

What are the features?

You can create boards by using an unlimited number of copper layers: signal layers, plane layers. You may have an unlimited use of other layer types: 'Mechanical' and 'Generic'.

You have an unlimited board area, as well as an unlimited number of schematic sheets or number of pins.

You also have an unlimited number of boards or schematics per project; you can have as many projects as you need in the solution, so you can create architectural designs.

Modern PCB Designer - Standard edition uses a modern user interface and also has the following features:

  • The dark theme to reduce the eye fatigue
  • Monochrome icons
  • IDE (Integrated Development Environment) with dockable windows
  • Tool windows that are contextual with current open document (board, schematic, etc)

Schematic editor with multiple sheets

You can have an unlimited number of sheets in the schematic. Also you may have an unlimited number of schematics in the same project.

Board editor

The board editor allows you to select a layer that you will work on and mask or hide any other layer for easy routing.

It allows to highlight a net and dimm the rest of the board to follow a net or for easy placement.

It supports multiple routing modes.

You can create complex rules. They work in a such a way that you define some generic rules, then you come with specific rules that will override the previous rules defined that applies for the same item.

Here is an example: let's say you have a net called RESET that goes to your microcontroller to the reset pin. Noise, coming from crosstalk, can reset your board.

For this, you need to define some electrical clearance rules; in this example, you will define an Electrical Clearance as a generic rule that your manufacturer allows (say 10 mil); then you define another Electrical Clearance rule between this net (RESET) and another net adjacent to this (say DATA from an I2C bus) that will generate crosstalk to put some space (say 20 mil); you can also define another clearance of the same net with another net next to it (maybe GND at 15mil).

So, in our scenario, we will have a clearance of 20 mil between RESET and DATA and a clearance of 15 mil between RESET and GND. Between RESET and any other net we'll have the default of 10 mil. This is very powerfull!

You can preview your board in 3D.

You can setup what layers will generate the gerber files for that particular board. A default number of layers will be already setup. You then choose to Build all the boards in your project with one single click.

Cross-select and cross-highlight between schematic and board

If you have open both schematic and the board, and in either one of these documents (say in schematic) you select a part, then this part will also be selected in the board.

If you highlight a net in schematic it will be also be highlighted in the board. This is very awesome because it helps with the placement: you select the parts in the schematic that you intent to place on board, and you also highlight the net, at the same time, you will be able to see what parts are in what relation with what pins in the board; this will be easy for you to place the parts next to each other and rotate them accordingly.

Again, it works both ways; you can select a part in the board and will be selected in schematic; you can highlight a net in the board and will be highlighted in the schematic.

 

3D Model Editor

Currently, there is a simple 3D model editor where you can create a complex geometry from multiple other simple geometry (boxes, cylinders, spheres, polys, etc) by joining them together.

It is rather limited, because you cannot have boolean operations (union, intersect), or extrusions, or complex features.

However, this limitation is overcomed by the fact that you can import 3D models from other 3D CAD programs.

We can import multiple 3D model file types.

 

Component Editor

The component editor allows to define the actual parts, components, by matching the pins from a symbol with pads from a footprint.

Here you can set a prefix and custom properties regarding this component.

You can also set BOM (Bill of Materials)

 

Footprint editor

The footprint editor allows to define the footprints that you will use in your components.

It comes with a wizard to quickly define some common footprint types (SOIC, QFP, Resistors).

You can preview the footprint in 3D, and also asociate the 3D model (that you defined with the 3D model editor).

Here's another cool feature: the model will try to align by itself.

 

You can have multiple boards in the same board project

Modern PCB Designer Studio allows you to define more than one board in your project.

You may choose to have a reference to the same schematic or to a different one.

Why would you have another board for the same schematic? Well, same schematic means same circuit. You may choose to have one board that will route on a single layer, for example, to build your own board at home. Or, you may choose for 2 layers if you intend to use a PCB manufacturer near you. You may try a different routing approach and test the difference, and so on.

Products specifications
Number of copper layers (plane and signal) Unlimited
Commercial use Yes
Board area Unlimited
Schematic sheets Unlimited
Number of pins Unlimited
Footprint Wizard Yes
Define Board Stackup Yes
Define Board Layers Yes
Define Drill Pairs Yes
Define Layer Pairs Yes